Rent Amplifier Research 700S1G4A Microwave Amplifier (Call for Availability):
The Amplifier Research 700S1G4A is a portable, self-contained, air-cooled, broadband, completely solid-state amplifier designed for applications where instantaneous bandwidth, high gain and linearity are required. Push-pull circuitry is utilized in all high power stages in the interest of lowering distortion and improving stability. The Amplifier Research 700S1G4A, when used with a sweep generator, will provide a minimum of 700 watts of RF power.
The Amplifier Research 700S1G4A is equipped with a Digital Control Panel (DCP) which provides both local and remote control of the amplifier. The DCP uses a color LCD touch screen and a single rotary knob to offer status reporting and control capability. The display provides Forward Power and Reflected Power values plus amplifier status. Special features include a gain control and RF output level protection.
All amplifier control functions and status indications are available remotely in GPIB/IEEE-488 format, RS232 hardwire and fiber optic, USB and Ethernet. The buss interface connector is located on the back panel and positive control of local or remote operation is assured by a keylock on the front panel of the amplifier.
The low level of spurious signals and linearity of the Amplifier Research 700S1G4A make it ideal for use as a driver amplifier in testing wireless and communication components and subsystems. It can be used as a test instrument covering multiple frequency bands and is suitable for a variety of communication technologies such as CDMA, W-CDMA, TDMA, GSM etc. It is also suitable for EMC Test applications where undistorted modulation envelopes are desired.
Functions and Specifications of the Amplifier Research 700S1G4A Includes:
RATED OUTPUT POWER: 700 watts minimum
INPUT FOR RATED OUTPUT: 1.0 milliwatt maximum
POWER OUTPUT @ 3dB COMPRESSION:
Nominal, 700 watts;
Minimum, 625 watts
POWER OUTPUT @ 1dB COMPRESSION:
Nominal, 600 watts;
Minimum, 525 watts
FLATNESS: ±1.5 dB typical; ±2.0 dB maximum
FREQUENCY RESPONSE: 0.8-4.2GHz instantaneously
GAIN (at maximum setting): 59 dB minimum
GAIN ADJUSTMENT: 15 dB minimum
INPUT IMPEDANCE: 50 ohms, VSWR 2.0:1 maximum
OUTPUT IMPEDANCE: 50 ohms nominal
MISMATCH TOLERANCE* 100% of rated power without foldback.
Will operate without damage or oscillation with any
magnitude and phase of source and load impedance.
MODULATION CAPABILITY: Will faithfully reproduce AM, FM,
or pulse modulation appearing on the input signal.
HARMONIC DISTORTION: Minus 20 dBc maximum at 700 watts
THIRD ORDER INTERCEPT POINT: 67 dBm typical
RF POWER DISPLAY: Digital, forward and reflected
PRIMARY POWER: 200-260VAC, 50/60 Hz, single phase, 3800 watts
IEEE-488 (GPIB) INTERFACE & RS-232: Allows control and monitoring
of all front panel controls except keylock position control
COOLING: Forced air (self contained fans)
WEIGHT: 124.8 kg (275 lbs)
EXPORT CLASSIFICATION: 3A001
Request A Quote
Customers who viewed this also viewed
Amplifier Research 200T1G3 Microwave Amplifier, 0.8 GHz - 2.8 GHz, 200W
Applied Systems Engineering 176X/KU Microwave TWT Pulsed Amplifier, 8 - 18 GHz, 1000W
IFI Instruments T7525-500 TWT Amplifier, 2.5 - 7.5 GHz, 500W
Amplifier Research 200S1G6 Broadband Amplifier, 0.7 GHz - 6 GHz, 200W