Tektronix Encore




Amplifier Research 700S1G4
Microwave Amplifier, 0.8 - 4.2 GHz, 700W

Amplifiers - RF and Microwave >> Above 1 GHz and 101 Watt to 999 Watt >> Microwave Amplifier, 0.8 - 4.2 GHz, 700W
Rent Used Test Equipment
Manufacturer: Amplifier Research
Model: 700S1G4

Amplifier Research 700S1G4 Microwave Amplifier, 0.8 - 4.2 GHz, 700W

Electronic Test and Measurement Equipment

Amplifier Research 700S1G4 Microwave Amplifier, 0.8 - 4.2 GHz, 700W Product Datasheet Download Product Datasheet

Rent Test Equipment

Product Overview

RENT AMPLIFIER RESEARCH 700S1G4 (Call for Availability)

The Amplifier Research 700S1G4 is a portable, self-contained, air-cooled, broadband, completely solid-state ampifier designed for applications that require instantaneous bandwidth, high gain and linearity. Its push-pull circuitry is utilized in all power stages lowering distortion and improving stability. 

Features and Specifications of the Amplifier Research 700S1G4 Amplifier include:

  • Features:
    • Provides a minimum of 700 watts of RF power when used with a sweep generator
    • Digital Control Panel (DCP):
      • Provides both local and remote control of the amplifier
      • Uses a graphic liquid crystal display:
        • Provides operational presentation of Forward Power and Reflected Power
        • Provides control status
        • Provides reports of internal amplifier status
      • Uses menu assigned softkeys
      • Uses a single rotary knob
      • Uses four dedicated switches: Power, Standby, Operate and Fault/Reset
      • Offers extensive control and status reporting capability
      • Provides a gain control and RF output level protection
    • All control functions and status indications are available remotely in GPIB/IEEE-488 format, RS-232 hardwire and fiber optic, USB, and Ethernet
    • Bus interface connector is located on the back panel
    • Local/Remote switch on front panel assures positive control of local or remote operation
    • Low level of spurious signals and linearity make it ideal for these various uses:
      • As a driver amplifier in testing wireless and communication components and subsystems
      • As a test instrument covering multiple frequency bands 
      • Suitable for communication technologies including CDMA, W-CDMA, TDMA, GSM etc.
      • Suitable for EMC Test applications where undistorted modulation envelopes are needed
  • Specifications:
    • Rated output power:  700 watts minimum
    • Input for rated output:  1.0 milliwatt maximum
    • Power output @ 3dB compression:
      • Nominal:  700 watts
      • Minimum:  625 watts
    • Power output @ 1dB compression:
      • Nominal:  600 watts
      • Minimum:  525 watts
    • Flatness: 
      • ±2.0 dB typical
      • ±2.5 dB maximum
    • Frequency response:  0.8 – 4.2 GHz instantaneously
    • Gain (at maximum setting):  59 dB minimum
    • Gain adjustment:  15 dB minimum
    • Input impedance:  50 ohms, VSWR 2.0:1 maximum
    • Output impedance:  50 ohms nominal
    • Mismatch tolerance:  
      • 100% of rated power without foldback
      • Will operate without damage or oscillation with any magnitude and phase of source and load impedance
    • Modulation capability:  Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal
    • Harmonic distortion:  Minus 20 dBc maximum at 650 watts
    • Third order intercept point:  67 dBm typical
    • RF power display:  Digital, forward and reflected
    • Primary power: 
      • 200-260VAC
      • 50/60 Hz, single phase
      • 3800 watts
    • Connectors:
      • RF:
        • Input:  Type N female on rear panel
        • Output:  Type 7/8 EIA on rear panel
      • Safety Interlock:  15 pin female subminiature D on rear panel
      • Remote computer interface:  IEEE-488 (GPIB) & RS-232 connector on rear panel
      • Remote computer interface (Fiber Optic):  ST Conn Tx and Rx RS-232
      • USB 2.0:  Type B
      • Ethernet:  RJ-45
    • IEEE-488 (GPIB) Interface & RS-232:  Allows control and monitoring of all front panel controls except keylock position control
    • Cooling:  Forced air (self contained fans)

 

Request A Quote

Rent      Buy      Repair
SUBMIT REQUEST
760-806-6600


Testimonial







Home   |   Rental Equipment   |   Equipment Sales   |   Repair & Calibration   |   Sell Your Equipment   |   About Us   |   Contact   |   Get A Quote   |   Blog    


Facebook Google Plus Paypal
Get the latest deals first. Subscribe to our newsletter.    SUBSCRIBE


© 2019 Axiom Test, All Rights Reserved
FAQ      Privacy      Terms      Site Map      Site Map XML     
© 2019 Axiom Test, All Rights Reserved
FAQ      Privacy      Terms      Site Map      Site Map XML

Axiom Test Equipment
2610 Commerce Way Vista, CA 92081
Phone: (760) 806-6600