Tektronix Encore




Amplifier Research 600S1G4A
Microwave Amplifier, 0.8 - 4.5 GHz, 600W

Amplifiers - RF and Microwave >> Above 1 GHz and 101 Watt to 999 Watt >> Microwave Amplifier, 0.8 - 4.5 GHz, 600W
Rent Used Test Equipment
Manufacturer: Amplifier Research
Model: 600S1G4A

Amplifier Research 600S1G4A Microwave Amplifier, 0.8 - 4.5 GHz, 600W

Electronic Test and Measurement Equipment

Amplifier Research 600S1G4A Microwave Amplifier, 0.8 - 4.5 GHz, 600W Product Datasheet Download Product Datasheet

Rent Test Equipment

Product Overview

RENT AMPLIFIER RESEARCH 600S1G4A (Call for Availability)

The Amplifier Research 600S1G4A is a portable, self-contained, air-cooled, broadband, completely solid-state ampifier designed for applications that require instantaneous bandwidth, high gain and linearity. The highly versatile 60S1G4A amplifier consists of two 350S1G4 sub-amplifiers housed in a single equipment rack with a controller. The 600S1G4A can function as one amplifier or be separated and operate as two separate 350S1G4A amplifiers which can be easily removed and used independently. 

Features and Specifications of the Amplifier Research 600S1G4A Amplifier include:

  • Features:
    • Provides a minimum of 600 watts of RF power when used with a sweep generator
    • Digital Control Panel (DCP):
      • Provides both local and remote control of the amplifier
      • Uses a graphic liquid crystal display:
        • Provides operational presentation of Forward Power and Reflected Power
        • Provides control status
        • Provides reports of internal amplifier status
      • Uses menu assigned softkeys
      • Uses a single rotary knob
      • Uses a dedicated on/off switch
      • Offers extensive control and status reporting capability
      • Provides operational presentation of Forwad Power and Reflected Power
      • Provides control status and reports of internal amplifier status
      • Provides gain control and RF output level protection
    • All control functions and status indications are available remotely in GPIB/IEEE-488 format, RS-232 hardwire and fiber optic, USB, and Ethernet
    • Buss interface connector is located on the back panel
    • Keylock on the front panel assures positive control of local or remote operation
    • Low spurious signals, linearity, and load tolerance make it ideal for these various uses:
      • RF susceptibility testing
      • Antenna/component testing
      • Communication technology testing
      • As a test instrument covering multiple frequency bands
      • Suitable for communication technologies including CDMA, W-CDMA, TDMA, GSM, UWB,WiMAX etc.
    • Expandable power, versatility and upgrade capability
  • Specifications:
    • Rated output power:  0.8 - 4.2 GHz, 600 watts minimum
    • Input for rated output:  1.0 milliwatt maximum
    • Power output @ 3dB compression:
      • Nominal:  675 watts
      • Minimum:  575 watts
    • Power output @ 1dB compression:
      • Nominal:  575 watts
      • Minimum:  475 watts
    • Flatness: ±2.5 dB maximum
    • Frequency response:  0.8 – 4.2 GHz instantaneously
    • Gain (at maximum setting):  57.8 dB minimum
    • Gain adjustment:  20 dB minimum
    • Input impedance:  50 ohms, VSWR 2.0:1 maximum
    • Output impedance:  50 ohms nominal
    • Mismatch tolerance:  
      • 100% of rated power without foldback
      • Will operate without damage or oscillation with any magnitude and phase of source and load impedance
    • Modulation capability:  Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal
    • Harmonic distortion:  Minus 20 dBc maximum at 600 watts
    • Third order intercept point:  67 dBm typical
    • RF power display:  Digital, forward and reflected
    • Primary power: 
      • 200-240VAC
      • 50/60 Hz, single phase
      • 4000 watts
    • Connectors:
      • RF:
        • Input:  Type N female on front panel
        • Output:  Type 7-16 on rear
      • Remote interfaces:  
        • IEEE-488:  24 pin
        • RS-232:  9 pin sub-D
        • RS-232 (fiber-optic):  Type ST  
        • USB 2.0:  Type B
        • Ethernet:  RJ-45
      • Safety Interlock:  15 pin female subminiature D on rear panel
    • Cooling:  Forced air (self contained fans) enters front and bottom

Request A Quote

Rent      Buy      Repair
SUBMIT REQUEST
760-806-6600


Testimonial







Home   |   Rental Equipment   |   Equipment Sales   |   Repair & Calibration   |   Sell Your Equipment   |   About Us   |   Contact   |   Get A Quote   |   Blog    


Facebook Google Plus Paypal
Get the latest deals first. Subscribe to our newsletter.    SUBSCRIBE


© 2019 Axiom Test, All Rights Reserved
FAQ      Privacy      Terms      Site Map      Site Map XML     
© 2019 Axiom Test, All Rights Reserved
FAQ      Privacy      Terms      Site Map      Site Map XML

Axiom Test Equipment
2610 Commerce Way Vista, CA 92081
Phone: (760) 806-6600