Amplifier Research 350S1G4A
Microwave Amplifier, 0.7 - 4.2 GHz, 350W

Download Product Datasheet

Product Overview

RENT Amplifier Research 350S1G4A (Call for Availability)

The Amplifier Research 350S1G4A is a portable, self-contained, air-cooled, broadband, and completely solid-state ampifier designed for applications that require instantaneous bandwidth, high gain, and linearity.  Housed in a single equipment rack the Amplifier Research 350S1G4A amplifier is designed to provide complete standalone performance for RF testing or it can be used as a sub-amplifier as well.

Features and Specifications of the Amplifier Research 350S1G4A Amplifier include:

• Features:
• Provides a minimum of 350 watts of RF power when used with a sweep generator
• Provides gain control and RF output level protection
• Touch-screen Display
• Digital Control Panel (DCP):
• Provides both local and remote control of the amplifier
• Uses a graphic liquid crystal display:
• Provides operational presentation of Forward Power and Reflected Power
• Provides control status
• Provides reports of internal amplifier status
• Uses menu assigned softkeys
• Uses a single rotary knob
• Uses four dedicated switches: POWER, STANDBY, OPERATE, and FAULT/RESET
• Offers extensive control and status reporting capability
• All control functions and status indications are available remotely in GPIB/IEEE-488 format, RS-232 hardwire and fiber optic, USB, and Ethernet
• Bus interface connector on the back panel
• Local/Remote switch on front panel provides positive control of local or remote operation
• Low level of spurious signals and linearity make it ideal for these various uses:
• As a driver amplifier in testing wireless and communication components and subsystems
• As a test instrument covering multiple frequency bands
• For communication technologies including CDMA, W-CDMA, TDMA, GSM, etc.
• For EMC Test applications where undistorted modulation envelopes are needed
• Upgrade capability
• Specifications:
• Rated output power:  350 watts minimum
• Input for rated output:  1.0 milliwatt maximum
• Power output @ 3dB compression:
• Nominal:  375 watts
• Minimum:  320 watts
• Power output @ 1dB compression:
• Nominal:  325 watts
• Minimum:  270 watts
• Flatness: 
• Typical:  ±2.0 dB
• Maximum:  ±2.5 dB
• Frequency response:  0.7 – 4.2 GHz instantaneously
• Gain (at maximum setting):  55.5 dB minimum
• Gain adjustment:  15 dB minimum
• Input impedance:  50 ohms, VSWR 2.0:1 maximum
• Output impedance:  50 ohms nominal
• Mismatch tolerance:  
• 100% of rated power without foldback
• Will operate without damage or oscillation with any magnitude and phase of source and load impedance
• Modulation capability:  Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal
• Harmonic distortion:  Minus 20 dBc maximum at 325 watts
• Third order intercept point:  65 dBm typical
• RF power display:  Digital, forward and reflected
• Primary power: 
• 120-240VAC
• 50/60 Hz, single phase
• 1900 watts
• Connectors:
• RF:
• Input:  Type N female on front panel
• Output:  Type 7/16 female on front panel
• Safety Interlock: 15 pin female subminiature D on rear panel
• Remote computer interface:  IEEE-488 (GPIB) and RS-232 connector on rear panel
• Remote computer interface (fiber optic):  ST Conn Tx and Rx RS-232
• Operate interface:  RJ-11 on rear panel
• USB 2.0:  Type B
• Ethernet:  RJ-45
• IEEE-488 (GPIB) Interface and RS-232:  Allows control and monitoring of all front panel controls except keylock position control
• Cooling:  Forced air (self contained fans)