Tektronix Encore




IFI Instruments T4026-25
TWT Microwave Amplifier, 26.5 - 40 GHz, 25W

Amplifiers - RF and Microwave >> Above 1 GHz and 100W or Less >> TWT Microwave Amplifier, 26.5 - 40 GHz, 25W
Rent Used Test Equipment
Manufacturer: IFI Instruments
Model: T4026-25

IFI Instruments T4026-25 TWT Microwave Amplifier, 26.5 - 40 GHz, 25W

Electronic Test and Measurement Equipment

IFI Instruments T4026-25 TWT Microwave Amplifier, 26.5 - 40 GHz, 25W Product Datasheet Download Product Datasheet

Rent Test Equipment

Product Overview

RENT IFI T4026-25

The IFI (Instruments for Industry) T4026-25 TWT Microwave Amplifier provides fantasitc RF performance. The T4026-25 Amplifier incorporates the latest features with respect to control and monitoring. The T4026-25 has field proven reliability histroy and unsurpassed performance as one of the best in the industry. The T4026-25 has a frequency range of 26.5 GHz to 40 GHz, with 25 Watts of available power.

Operation safety and ease of use are paramount in IFI product designs. The IFI T4026 Series include a full complement of RF and hardware protection systems including high VSWR, over-current and voltage protection as well as redundant thermal and airflow sensors to prevent the TWT from overheating. In addition, the T4026-25 includes a state-of-the-art interface that is sophisticated, comprehensive, yet simple to use. The IFI T4026 series of amplifiers feature modular construction and this concept of modular design minimizes internally produced EMI signal leakage and provides easy access for field service and rapid turnaround at depot level repair facilities.

The backlit LCD screen shows forward/reverse power indication, system status and self-diagnostic information. All the amplifier operating parameters are simultaneously available in the amplifier front panel display as well as over the remote bus. Selection switches allow you to switch the amplifier to the desired mode of operation for local control if the unit is not being operated remotely.

For computer automation both an RS-232 and IEEE-488 interface are included. To meet individual application needs, the T4026 Series amplifiers can be easily customized with harmonic filters or other options.

Features of the IFI T4026-25 include:

  • Instantaneous Broadband Frequency range
  • Modular Design Construction
  • Rugged Construction & High Reliability
  • Backlit LCD Display
  • Integrated Force Air Cooling
  • Self-diagnostic circuitry
  • IEEE-488 interface, RS232 & Ethernet Remote available
  • Solid State Power Supply
  • VSWR Reflected Power Protection, the unit operates without damage or oscillation into any magnitude of phase or load impedance, Open and Short Circuit Protection.
  • * Alternate Prime Power (specify at time of order)
  • GPIB IEEE 488 & RS232 Remote Control
  • RF Sample Port on the Front Panel, 112R for rear panel
  • Internal Pre-amplification to obtain rated output power with an input level of 0 dBm or less.
  • RF Input/Output Connectors on the Front Panel, 118R for rear panel
  • Internal Systems Diagnostics & Status Indicators
  • Filament/Beam Elapsed Time Metering in hours
  • RF Safety Interlock
  • Forward/Reflected Power Indication simultaneously on Front Panel display

Specifications of the IFI T4026-25 TWT Amplifier include:

  • Frequency Range: 26.5 GHz to 40 GHz
  • Rated Minimum Power: 25 Watts
  • Rated Minimum P1dB Power: 10 Watts
  • Gain Minimum 44dB
  • Mains: 0.8 kVA
  • Weight: 45 lbs
  • Dims inches: 19 x 24 x 5.25
  • Input/output Impedance: 50 ohms
  • RF Input/ Sample Connectors: Type K Female, unless specified otherwise
  • RF Output Connector: WR28 Other waveguides available by request or specification (see Option 117)
  • Input VSWR: 2.0:1
  • Output VSWR: 2.5:1
  • Operating Temp: 0º to 50º C
  • Non-operating Temp: -40º to 70º C (50,000 feet max)
  • Humidity: 95% without condensation
  • Altitude: 10,000 feet
  • Cooling System: Air cooled, self contained
  • Modulation: All types, AM, FM, Pulse
  • Configuration: Rack Mount as specified in Model Table, or Cabinet Integrated as needed
  • Spurious Outputs:
  • Standard Prime Powers:
    100, 110, 115, 120 VAC ±10% 50/60 Hz, single phase
    200, 220, 230, 240 VAC ±10% 50/60 Hz, single phase
    100/200VAC,115/208 or 200/220/230/240 VAC ±10% 50/60 Hz, three phase Wye or Delta and/or 400 Hz power is available.

 

Request A Quote

Rent      Buy      Repair
SUBMIT REQUEST
760-806-6600


Testimonial







Home   |   Rental Equipment   |   Equipment Sales   |   Repair & Calibration   |   Sell Your Equipment   |   About Us   |   Contact   |   Get A Quote   |   Blog    


Facebook Google Plus Paypal
Get the latest deals first. Subscribe to our newsletter.    SUBSCRIBE


© 2019 Axiom Test, All Rights Reserved
FAQ      Privacy      Terms      Site Map      Site Map XML     
© 2019 Axiom Test, All Rights Reserved
FAQ      Privacy      Terms      Site Map      Site Map XML

Axiom Test Equipment
2610 Commerce Way Vista, CA 92081
Phone: (760) 806-6600