Tektronix Encore

Amplifier Research 60S4G11
Microwave Amplifier, 4 - 10.6 GHz, 60W

Amplifiers - RF and Microwave >> Above 1 GHz and 100W or Less >> Microwave Amplifier, 4 - 10.6 GHz, 60W
Rent Used Test Equipment
Manufacturer: Amplifier Research
Model: 60S4G11

Amplifier Research 60S4G11 Microwave Amplifier, 4 - 10.6 GHz, 60W

Electronic Test and Measurement Equipment

Amplifier Research 60S4G11 Microwave Amplifier, 4 - 10.6 GHz, 60W Product Datasheet Download Product Datasheet

Rent Test Equipment

Product Overview


RENT AMPLIFIER RESEARCH 60S4G11 (Call for Availability)

The Amplifier Research 60S4G11 is a portable, self-contained, air-cooled, broadband, solid-state amplifier designed for applications that require instantaneous bandwidth, high gain and linearity. 

Features and Specifications of the Amplifier Research 60S4G11 Amplifier include:

  • Features:
    • Provides a minimum of 60 watts of RF power when used with a sweep generator
    • Digital Control Panel (DCP):
      • Provides both local and remote control of the amplifier
      • Uses a graphic liquid Crystal Display:
        • Provides operational presentation of forward power and reflected power
        • Provides control status
        • Provides reports of internal amplifier status
      • Uses menu assigned softkeys
      • Uses a single rotary knob
      • Uses a dedicated on/off switch
      • Offers extensive control and status reporting capability
    • Special features:
      • Gain control
      • Internal/external automatic level control (ALC) with front panel control of the ALC threshold
      • Pulse input capability
      • RF output level protection
    • Internal RF detector which provides an output for use in self-testing or operational modes
    • All control functions and status indications are available remotely in GPIB/IEEE-488 format, RS-232 hardwire and fiber optic, USB, and Ethernet
    • Bus interface connection on back panel
    • Keylock on front panel assures positive control of local or remote operation
    • Low spurious signals, linearity, and load tolerance make it ideal for these various uses:
      • RF susceptibility testing
      • Antenna/component testing
      • Communication technology testing
      • As a test instrument covering multiple frequency bands
      • Suitable for communication technologies including CDMA, W-CDMA, TDMA, GSM, UWB, WiMAX etc.
    • Expandable power, versatility, and upgrade capability
    • Consists of three 20S4G11 sub-amplifiers housed in a single equipment rack with a controller:
      • Functions as one amplifier
      • Or be separated into three individual 20S4G11 amplifiers that can each be used independently
  • Specifications:
    • Rated output power:  60 watts minimum
    • Power output @ 3dB compression:
      • Nominal:  70 watts
      • Minimum:  60 watts
    • Power output @ 1dB compression:
      • Nominal:  60 watts
      • Minimum:  50 watts
    • Flatness:
      • typical:  ±2.0 dB
      • maximum:  ±3.0 dB
    • Frequency response:  4.0 – 10.6 GHz instantaneously
    • Input for rate output:  1.0 milliwatt maximum, 0 dBm
    • Gain (at maximum setting):  47.8 dB minimum
    • Gain adjustment (continuous range):  10 dB minimum
    • Input impedance:  50 ohms, VSWR 2.5:1 maximum
    • Output impedance:  50 ohms, nominal
    • Mismatch tolerance:  
      • 100% of rated power without foldback
      • Will operate without damage or oscillation with any magnitude and phase of source and load impedance
    • Modulation capability:  Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal
    • Harmonic distortion:  Minus 20 dBc maximum at 60 watts
    • Third order intercept point:  56 dBm typical
    • RF power display:  Digital, forward, and reflected
    • Primary power (selected automatically): 
      • 90-132, 180-264VAC
      • 50/60 Hz, single phase
    • Connectors:
      • RF input:  Type N female on front panel
      • RF output:  Type N female on rear panel
      • External leveling inputs:  Type BNC female on front panel
      • Pulse modulation input:  Type BNC female on front panel
      • Detected RF output:  Type BNC female on front panel
      • Remote interfaces:
        • IEEE-488:  24 pin female
        • RS-232:  9 pin Subminiature D (female)
        • RS-232 (fiber-optic):  Type ST
        • USB 2.0:  Type B
        • Ethernet:  RJ-45
      • Sub-Amplifier interface:  RJ-45
    • Safety interlock:  15 pin Subminiature D
    • Cooling:  Forced air (self contained fans)


Request A Quote

Rent      Buy      Repair


Home   |   Rental Equipment   |   Equipment Sales   |   Repair & Calibration   |   Sell Your Equipment   |   About Us   |   Contact   |   Get A Quote   |   Blog    

YouTube Facebook Google Plus Paypal
Get the latest deals first. Subscribe to our newsletter.    SUBSCRIBE

© 2020 Axiom Test, All Rights Reserved
FAQ      Privacy      Terms      Site Map      Site Map XML     
© 2020 Axiom Test, All Rights Reserved
FAQ      Privacy      Terms      Site Map      Site Map XML

Axiom Test Equipment
2610 Commerce Way Vista, CA 92081
Phone: (760) 806-6600