Tektronix Encore

Transcat




Amplifier Research 5000A225
RF Amplifier, 10 kHz - 225 MHz, 5000W

Amplifiers - RF and Microwave >> 1 GHz or Less and 1000 Watt or More >> RF Amplifier, 10 kHz - 225 MHz, 5000W
Rent Used Test Equipment
Manufacturer: Amplifier Research
Model: 5000A225

Amplifier Research 5000A225 RF Amplifier, 10 kHz - 225 MHz, 5000W

Electronic Test and Measurement Equipment

Amplifier Research 5000A225 RF Amplifier, 10 kHz - 225 MHz, 5000W Product Datasheet Download Product Datasheet

Rent Test Equipment

Product Overview

Rent Amplifier Research 5000A225 Amplifier (call for availability)

The Amplifier Research 5000A225 is a self-contained, air-cooled, broadband, completely solid state amplifier designed for applications where instantaneous bandwidth and high gain are required. Push-pull MOSFET circuitry is utilized in all high power stages in the interest of lowering distortion and improving stability.

The Amplifier Research 5000A225 is equipped with a Digital Control Panel (DCP) which provides both local and remote control of the amplifier. The DCP uses a 3¾-inch diagonal graphic display, menu assigned softkeys and a single rotary knob to offer extensive control and status reporting capability. The display provides operational presentation of Forward Power and Reflected Power plus control status and reports of internal amplifier status. Special features include a gain control, internal automatic level control (ALC) with front panel control of the ALC threshold and RF output level protection.

All amplifier control functions and status indications are available remotely in GPIB/IEEE-488 format, RS-232 hard wire and fiber optic and USB. The bus interface connectors are located on the back panel and positive control of local or remote operation is assured by a keylock on the front panel of the amplifier. High efficiency universal input, power factor corrected switching power supplies provides DC to all internal sub-assemblies.

Housed in a stylish, contemporary enclosure, the Amplifier Research 5000A225 provides readily available RF power for typical applications such as RF susceptibility testing, antenna and component testing, watt meter calibration, particle accelerators, plasma generation, communications and use as a driver for higher power amplifiers. The Amplifier Research 5000A225M6 enclosure includes four 6-inch casters for ease of mobility.

Features and Specifications of the Amplifier Research 5000A225 Amplifier Include:

RATED OUTPUT POWER: 5000 watts, 10 kHz–50 MHz

5000–4000 watts, 50 MHz–200 MHz
(derating slope from 50 MHz–200MHz) 6.66 W/MHz
3500 watts, 200–225 MHz
 
INPUT FOR RATED OUTPUT: 1.0 milliwatt maximum
 
POWER OUTPUT @ 1 dB COMPRESSION:3400 watts, 10 kHz–100 MHz
3400–2500 watts, 100 MHz–200 MHz
(derating slope of 9.0 watts/MHz)
2000 watts, 200–225 MHz
 
FREQUENCY RESPONSE: 10 kH
z–225 MHz instantaneously
 
GAIN (at maximum setting): 67 dB minimum
 
FLATNESS: ± 1.5 dB maximum
± 0.8 dB with internal leveling
 
GAIN ADJUSTMENT (continuous range): 20 dB minimum
 
INPUT IMPEDANCE: 50 ohms, VSWR 1.5:1 maximum
 
OUTPUT IMPEDANCE: 50 ohms, nominal
 
MISMATCH TOLERANCE: 100% rated power without foldback up to 6.0:1
mismatch above which may limit to 2500 watts reflected power,
from 10 kHz to 50 MHz. Limited to 2000
watts reflected power from 50 MHz to 225 MHz.
 
MODULATION CAPABILITY: Faithfully reproduces AM, FM or
Pulse modulation appearing on input signal.
 
HARMONIC DISTORTION: Minus 20 dBc maximum at 3000 watts power
output.
 
THIRD ORDER INTERCEPT POINT: 74 dBm typical
 
RF POWER DISPLAY: 0 - 7500 watts full scale
 
RF RISE/FALL TIME: 10 nanoseconds maximum
 
PRIMARY POWER (User must specify): 187-264 VAC Delta (4 wire), Wye
compatible 365-528 VAC, Wye (5 wire) 47-63 Hz,
3-phase 20,000 watts maximum at .95 P.F. typical

REQUEST A QUOTE




Testimonials

Axiom Test has an excellent range of test equipment and is always super responsive to short notice requests. They are an extension of our quality and engineering team with the support they provide us. Thanks!


-- Eric G.
Phoenix, AZ



Why Choose Axiom?


Your testing is complicated enough, we want to make sourcing test equipment the easy part.


Dedicated Customer Service
We go beyond the role of order taker & strive to partner with you to provide a custom solution.
Competitive Prices
Equipment is agressively priced. We work with you to find a solution to fit your budget.

Fast Turnaround
No long drawn-out sales process, We help you find the equipment you need, and get through order processing quickly so your equipment ships out fast!

Warranty & Support
Comprehensive Parts and Labor warranty on all equipment sold. Includes a user manual, is fully accessorized, and tested to manufacturer specifications prior to shipment.

Testimonials

Got wonderful experience with Axiom. They have all the devices we need and the lady is very helpful during the usage. I accidentally dropped an important item in the package during equipment return. The lady Geri happened to find it and sent it back! Both great thanks to Geri and their team!

Kevin H.
San Jose, CA




Home   |   Rental Equipment   |   Equipment Sales   |   Repair   |   Calibration   |   Sell Equipment   |   About   |   Contact   |   Get A Quote   |   Blog  |   Videos

Subscribe to receive our weekly news & promotions
SUBSCRIBE




FAQ      Privacy      Terms      Site Map     


© 2024 Axiom Test, All Rights Reserved   

Axiom Test Equipment
2610 Commerce Way Vista, CA 92081
sales@axiomtest.com
(760) 806-6600