RENT AMPLIFIER RESEARCH 10W1000C RF Amplifier (Call for Availability)
The Amplifier Research 10W1000C is a portable, self-contained, air-cooled, broadband, solid state amplifier designed for applications where instantaneous bandwidth and high gain are required. Push-pull circuitry is utilized in the high power stages to lower distortion and improve stability. The 10W1000C, when used with an RF sweep generator, will provide a minimum of 10 watts of swept power. The 10W1000C includes digital control for both local and remote control of the amplifier.
Included is a front panel gain control which permits the operator to conveniently set the desired output level. The 10W1000C is protected from RF input overdrive by limiting diodes and an RF input leveling circuit which controls the RF input level to the RF amplifier first stage when the RF input level is increased above 0 dBm. The RF Amplifier stages are protected from over temperature by removing the DC voltage to them if an over temperature condition occurs due to cooling blockage or fan failure. There is a digital display on the front panel to indicate the operate status and fault conditions when an over temperature, power supply, or amplifier fault has occurred.
Specifications for the Amplifier Research 10W1000C RF Amplifier Include:
Frequency | 500kHz - 1000MHz |
Rated Output Power | 10W |
Gain | 40 dB min |
See Datasheet for full specifications
This model has been replaced by the Amplifier Research 10U1000
Testimonials |
I appreciate that everyone was very kind and we were able to have rental test equipment ship so quickly! -- Jessica P. Woodlyn, PA |