Yokogawa DL850 ScopeCorder  

RENT Yokogawa DL850 (call for availability)

The Yokogawa DL850 ScopeCorder Series is a modular, waveform recording instruments that can measure voltage, current, strain, acceleration, and other phenomena-- simultaneously.

With high speed sampling, high isolation withstand voltage, and multichannel measurements, the Yokogawa DL850 Recorder offers powerful support in the development, evaluation, and quality control of energy efficient devices.

Impressive features of the Yokogawa DL850 include:

• High-speed (up to 100 MS/s), High Resolution (up to 16-bit), Isolated (up to 1kV ith the isolated probe 700929 or 701947)
• Multi-channel, up to 128 voltage or 128 logic bits
• Continuous hard disk recording at 100 kS/s simultaneously on 16 channels (With the /HD0 or /HD1 option)
• CAN bus monitoring and trend waveform display (DL850V only)
• 15 plug-in modules
• Large (2 GPoint) memory offers long duration measurement and two instantaneous zoom locations —2 GPoint memory (/M2 option)—

For fast inverter signals Yokogawa's isoPRO technology offers industry-leading isolation performance at the highest speeds. The isoPRO core technology is designed with energy savings applications in mind. It gives you the performance needed to develop high efficiency inverters, which employ high voltages, large currents, and high operating speeds. You can accurately observe inverter startup waveforms with sufficient time resolution. You can confirm that no excessive overshoots occured.

By using high-speed optical fiber-based transmissions, the 720210, 100 MS/s 12-Bit Isolation Module, achieves high speed ADC clock and data isolation.

The Yokogawa DL850 is backwards-compatible with all modules of its predecessor, the DL750. In addition, four new modules have been added to the lineup for a total of 15 modules to meet your specific testing requirements. Combine modules at will to measure anything from minute voltages to high-speed, high withstand voltages.

The 16-CH Voltage Input Module (scanner type*) can measure at 10 kS/s sample rate even when using all 16 channels. With this module populating all 8 input module slots, the DL850 performs 128-CH voltage measurements.

The Logic Input Module supports everything from TTL levels, to high voltage contact closures at up to 10 MS/s*. With eight logic modules, the DL850 can monitor and capture 128 bits of logic.

An example of measuring the startup sequence of a multi-output power source: Power supplies used in home computing electronics have many outputs, and it is necessary to control the sequences from output to output. With a multichannel module, you are not limited to voltage measurements; a single unit can also measure everything from PC control signals to AC fan operation, individual component temperatures, and slow to high-speed signals.

Dual Capture - Allows you to catch transients in durability with high-speed sampling:

To visualize long term trends in durability testing and other situations, data is typically acquired at low-speed sample rates. On the other hand, suddenly-occurring transitional phenomena should be captured at high-speed sample rates.

The "Dual Capture" feature resolves these conflicting requirements by recording at two different sampling rates.

• Zoom Waveform - You can record up to 5,000 phenomena of high speed trigger measurements (up to 100 MS/s) at a record length of 5-500 kPoints while taking trend measurements at up to 100 kS/s.
• Event Waveform -Displays the timing at which high speed "sub" waveforms are acquired
• Low Speed Main Waveform - Max: 100 kS/s Trend waveform displayed in a low-speed Roll mode
• Capture Waveform - Max 100 MS/s Capture transients with high speed trigger measurement

An example of parts durability testing: Parts used in automobiles and other transportation vehicles must be highly reliable. The "Dual Capture" function is very effective when performing vibration testing of connectors under varying temperatures.

• Chattering is accurately caputured at high-speed sampling
• Check the frequency of occurence at low-speed sampling

Modules:

• 701250 High-speed 10 MS/s 12-Bit Isolation Module (2 ch)
• 701251 High-speed 1 MS/s 16-Bit Isolation Module (2 ch)
• 701255 High-speed 10 MS/s 12-Bit non-Isolation Module (2 ch)
• 701260 High-voltage 100 kS/s 16-Bit Isolation Module (with RMS, 2 ch)
• 701261 Universal Module (2 ch)
• 701262 Universal Module (with Anti-Aliasing Filter, 2 ch)
• 701265 Temperature/high-precision voltage Module (2 ch)
• 701270 Strain Module (NDIS, 2 ch)
• 701271 Strain Module (DSUB, Shunt-CAL, 2 ch)
• 701275 Acceleration/Voltage Module (with Anti-Aliasing Filter, 2 ch)
• 701280 Frequency Module (2 ch)
• 720210 High-speed 100 MS/s 12-Bit Isolation Module (2 ch)
• 720220 Voltage Input Module(16 ch)
• 720230 Logic Input Module (16 ch)
• 720240 CAN Bus Monitor Module (32 ch, available DL850V only)

MSRP: $6,995.00

Our Price: $Call For Price