Tektronix TDP1000
High Voltage Differential Probe, 1 GHz

The Tektronix TDP1000 High-voltage Differential Probe is a versatile and easy to use probe that provides high-speed electrical and mechanical performance needed for Switch Mode Power Supply, CAN/LIN Bus, and for high-speed digital system designs. The Tektronix TDP1000 Probe is designed specifically for use with, and direct connection to, Tektronix oscilloscopes with either the TekVPI™ probe interface, or TekProbe BNC Interface.

Features and Specifications of the TDP1000 Differential Probe include:

• Features:
  • Versatile DUT Connectivity:
    • Small compact probe head for probing small geometry circuit elements
    • Straight pin, square pin, solder down, variable pitch standard accessories
    • Robust design for reliability
  • Provides high-speed signal acquisition and measurement fidelity with its:
    • Outstanding electrical performance
    • Versatile device-under-test connectivity
    • Ease of use
  • Connects directly to oscilloscope with the TekVPI™ probe interface
  • Provides automatic units scaling and readout on the oscilloscope display
  • Embeds the probe characteristics within the oscilloscope
  • Easy access to scope-displayed probe menu:
    • for probe setup control
    • for operating status information
  • Remote GPIB/USB probe control through the oscilloscope
  • AutoZero:  Zeros out output offset
  • Applications:
    • High-speed switch mode power supply design
    • CAN/LIN bus design
    • High-speed digital design
    • Digital design and characterization
    • Manufacturing engineering and test
    • Research and development
• Specifications:
  • Probe Bandwidth:  1 GHz
  • Probe Attenuation:  5X, 50X
  • Probe Rise Time:  ≤350 ps
  • Differential Input Capacitance: 
  • Differential Input Resistance:  1 MΩ
  • CMRR:
    • >55 dB at 30 kHz
    • >50 dB at 1 MHz
    • >18 dB at 250 MHz (warranted at 50X attenuation)
  • Sensitivity /Noise Level:
    • 2 mV_RMS (5X attenuation)
    • 1 mV_RMS (50X attenuation) referred to the probe output
    • 10 mV_RMS (5X attenuation)
    • 50 mV_RMS (50X attenuation) referred to the probe input
  • Differential Mode Input Voltage:  ±42 V (DC + pk AC); 30 V_RMS
  • Common Mode Input Voltage:  ±35 V (DC + pk AC); 25 V_RMS
  • Input Offset Range:  ±42 V (5X or 50X attenuation)
  • Max Input Voltage (Nondestruct):  ±100 V (DC + pk AC)
  • Selectable Bandwidth Filter Limits:  100 Hz, 10 kHz, 1 MHz, Full
  • DC Reject:
    • 0.4 Hz (5X)
    • 4 Hz (50X)
  • Gain Accuracy at DC:  ±2%
  • Propagation Delay:  6.5 ns
  • Probe Interface:  TekVPI™ Probe Interface