Chroma 19055
Hipot Analyzer, 500VA Output, 5kV AC, 6kV DC

Download Product Datasheet

Product Overview

CHROMA 19055

The Chroma 19055 Hipot Tester is the perfect instrument for testing devices requiring a high charge current. In all cases, both high and low limits are operator programmable for quick, and easy pass/fail testing. These dual limits are essential to ensure that the device under test is actually making contact with the tester. For consistent testing, up to 50 setups can be stored in instrument memory for later recall. An optional high voltage scanner is also available for testing multi-connection devices.

Features and Specifications of the Chroma 19055 Hipot Tester include:

• AC Hipot Voltage up to 5000V, Output Current to 100mA
• DC Hipot Voltage 50 to 6000V, Output Current to 20mA
• IR Measurements 1MΩ to 50GΩ, Test Voltage 50 to 1000VDC
• Floating output complies with EN50191
• Optional Corona Disharge Detection (CDD, 19055-C)
• Optional Flashover Detection (ARC)
• Programmable Ramp and Test Times
• Fast Cutoff and Quick Discharge of Device Under Test
• Discharge Level Analysis (DLA)
• Open/Short Check function (OSC)
• High Frequency Contact Check (HFCC)
• Ground Fault Interrupt
• Standard RS-232 Interface
• Optional GPIB & HANDLER Interface
• Key Lock when Fail
• Programmable Voltage and Test Limit
• CE Mark
• Supports A190301 8HV Scanning Box (optional)
• Programmable Hi/Lo Limits for Pass/Fail Testing
• LCD Display for Menu Programming and Test Results
• Internal Storage and Recall of 50 Test Setups, 10 Steps Each
• Front and Rear Panel Output Connections
• Front Panel Lockout Prevents Changes to the Test Setup
• Automatic Offset to Zero Out Stray Leakage Current
• Remote I/O Interface Included Standard
• RS-232 Interface Optional
• IEEE-488 and Printer Interfaces Optional

The Chroma 19055 is an updated / revised version of the Quadtech Guardian 500VA PLUS

Click to see all the models in this series