Agilent E5270A, Keysight E5270A, HP E5270A
Parametric Measurement System Mainframe, 8-Slot

Download Product Datasheet

Product Overview

AGILENT / KEYSIGHT E5270A

The Agilent E5270A 8-Slot Parametric Measurement Mainframe is completely user configurable. You can install up to eight single-slot modules (such as the MPSMU), up to four dual-slot modules (such as the HPSMU), or any physically allowable combination thereof.

The Keysight E5270A Precision IV Analyzer is a complete solution for current-voltage characterization of a wide range of materials and devices. The E5270A supports multiple SMUs (Source/Monitor Units) for voltage / current sourcing and voltage / current measurement with the best in the class current measurement performance as low as 1 nA. Its modular architecture allows you to configure or upgrade SMU modules for available eight slots. Powerful integration of SMU’s versatile measurement capabilities makes the E5270A a good solution for characterization and evaluation of devices, materials, semiconductors, active/passive components, or virtually any other type of electronic device with uncompromised measurement reliability and efficiency.

Features of the Keysight E5270A Parametric Measurement System include:

• Performs high-speed, dc parametric measurements
• Eight slots for plug-in modules
• User interface allows spot measurements to be made from the front panel
• High-resolution, analog-to-digital converter (ADC) available to all installed modules
• High-speed ADC present on each installed SMU
• 4-Amp ground unit
• BNC trigger-in and trigger-out connectors
• 16 general-purpose digital I/Os
• Program memory
• GPIB port for instrument control
• Self-test, self-calibration, diagnostics

Supported measurement modes include:

• Spot
• Pulsed Spot
• Quasi-pulsed Spot
• Staircase Sweep
• Multi-Channel Sweep
• Pulsed Sweep
• Staircase Sweep with Pulsed Bias
• Linear Search
• Binary Search

Specifications of the Agilent E5270A include:

• Measurement range:
• with E5280A: 2 mV to 200 V, 10 fA to 1 A
• with E5281A: 2 mV to 100 V, 10 fA to 200 mA
• Maximum Output Power: 80W
• Maximum Common to Ground voltagemust be ≤42 V
• Pulse Measurement
• Pulse width: 500 µs to 2 s
• Pulse period: 5 ms to 5 s
• Period ≥Width + 2 ms (when Width ≤100 ms)
• Period ≥Width + 10 ms (when Width >100 ms) Pulse resolution: 100 µs
• GNDU: Ground Unit furnished with the E5270A mainframe
• Output Voltage: 0 V ±100 mV
• Maximum sink current: 4 A
• Output terminal/connection: Triaxial connector, Kelvin (remote sensing)