Agilent / HP 6015A Power Supply, 500V, 5A, 1050W
The HP Agilent 6015A Power Supply takes the place of multiple power supplies on your test bench by providing maximum power at a variety of operating points. The HP 6015A has ten-turn front panel pots to allow precise local control. This power supply also may be connected in auto-parallel or series with their corresponding GPIB unit (6030 Series), as part of a test system.
Specifications of the Agilent 6015A Power Supply include:
- 500V, 5A, 1050W
- Autoranging output:
- V1, I1: 500 V, 2 A
- V2, I2: 350 V, 3 A
- V3, I3: 200 V, 5 A
- Ripple and noise, 20 Hz to 20 MHz
- Voltage rms: 50 mV
- p-p: 160 mV
- Current rms: 50 mA
- Load regulation
- Voltage 0.01%+: 13 mV
- Current 0.01%+: 35 mA
- Transient response time: 10% step change
- Programming resolution
- Voltage: 125 mV
- Current: 1.25 mA
- DC floating voltage (either terminal can be grounded or floated from chassis ground): ±550 V
- AC input current
- 100 VAC: 24 A
- 120 VAC: 24 A
- 220 VAC: 15 A
- 240 VAC: 14 A
- Remote Sensing: Up to 2 V drop in each lead. Voltage regulation specification met with up to 0.5 V drop, but degrades for greater drops.
- Modulation: (analog programming of output voltage and current)
- Input signal: 0 to 5 V or 0 to 4 k Ohms
MSRP:
$5,214.00
Our Price:
$Call For Price
|